Universal Implant Driver Kit Instruction

universal implant driver kit
14
Nov
Universal Implant Driver Kit is a set of specialized tools that allow dentists to work with multiple types of dental implants from different brands. Instead of needing a separate driver for each implant system, this kit includes a variety of driver heads that fit different implant connections (sizes and shapes). This flexibility makes it easier and more efficient for dentists, especially if they use implants from various manufacturers.
In simple terms, a universal implant driver kit is like a multi-tool for dental implants. It saves time, space, and money by offering a one-stop solution for implant procedures, making it a convenient choice for dental practices that work with a range of implant systems.

Universal Implant Driver Kit instruction.

Product Description

An implant torque wrench is a reusable tool used in the installation process of dental implants, consisting of a wrench body and a wrench The rod is composed of stainless steel and titanium alloy materials. Used during the dental implantation process. Passive products. wrong Aseptic provision. Before use, the using organization shall provide instructions Sterilize with instructions. Screwed up, consisting of a rotating cap and screws, made of stainless steel and aluminum alloy materials. stay Used during the dental implantation process. Passive products. Non sterile provision. Before use, the user organization should follow the instructions to proceed with Sterilize. (Model)

HYG-DH03,HYG-DH04,HYG01-195,HYG-D11173,HYG-DH174

Intended use

After implant placement, installation of abutments, crowns, impression taking, etc.

Scope of use

It is suitable for use in dental implant surgery and its restoration and during the preparation of dental crowns by technicians.

Usage

When tightening with the wrench, please insert the corresponding screwdriver (or component) into the wrench hole vertically. After you hear a click for proper installation, As shown below:

universal implant driver wrench with driver kit
  • Make sure the arrow points clockwise, and use the torque specified in the “Instruction Manual” of the relevant product to tighten the repair ble assembly. If necessary, use a wrench to exit the repair assembly, so that the direction indicator is in reverse mode. Operation method as shown lean, below: a, b, and c. Figure c is the reverse mode.
  • Manually apply pressure to lever arm c to unscrew the repair assembly.
how to use universal implant wrench

Precautions and warnings 

  1. Dental implant tools must be cleaned and sterilized before use.
  2. The chemical reagents used for the reprocessing of dental implant tools should not be strong acids with strong corrosiveness or a strong alkaline solution.
  3. When dental implant tools are damaged or worn out significantly, they should be replaced with new ones.

Sterilization method

  1. Lift the torque wrench and screw into an undamaged sterilization bag for sterilization.
  2. Perform high-temperature and high-pressure sterilization at a temperature of 136 °C± 2 °C. Or set according to local regulations.
  3. After sterilization, remove the working tip from the sterilizer and perform natural drying. It must be ensured to be completely dry.

Storage method

The planting tools for scientific implants should be stored in a clean, dry, ventilated environment with a relative humidity of 10% to 93% and a temperature of indoor without corrosive gases ranging from -20C to*55C.

Validity period

5 years.

Target audience

Adult and pediatric dental patients.

SPECIFICATIONS

HYG-DH03-11(25mm), HYG-DH03-12(25mm), HYG-DH03-L3(25mm), HYG-DH03-14(25mm), HYG-DH03-15(25mm), HYG-DH03-L6(25mm), HYG-DH03-L7(25mm), HYG-DH03-L8(25mm), HYG-DH03-51 (20mm), HYG-DH03-52(20mm), HYG-DH03-53(20mm), HYG-DH03-54(20mm), HYG-DH03-55(20mm), HYG-DH03-56(20mm), HYG-DH03-57(20mm), HYG-DH03-58(20mm), HYG-DH04-L1(25mm), HYG-DH04-12(25mm), HYG-DH04-13(25mm), HYG-DH04-14(25mm), HYG-DH04-15(25mm), HYG-DH04-16(25mm), HYG-DH04-1.7(25mm), HYG-DH04-18(25mm), HYG-DH04-51(20mm), HYG-DH04-52(20mm), HYG-DHO4S3(20mm), HYG-DH04-54(20mm), HYG-DH04-55(20mm), HYG-DH04-56(20mm), HYG-DH04-57(20mm), HYG-DH04-58(20mm), HYG-DH83, HYG-DH84, HYG-DH85,HYG-DH86,HYG-DH87, HYG-DH88, HYG-DH89, HYG-DH90, HYG-DH173-11(25mm), HYG-DH173-1_2(25mm), HYG-DH173-L3(25mm), HYG-DH173-14(25mm), HYG-DH173-15(25mm), HYG-DH173-L6(25mm), HYG-DH173-17(25mm), HYG-DH173-L8(25mm), HYG-DH173-51(20m m), HYG-DH173-52(20mm),HYG-DH173-53(20mm), HYG-DH173-54(20mm), HYG-DH173-55(20mm), HYG-DH173-56(20mm), HYG-DH173-57(20mm), HYG-DH173-58(20mm), HYG-DH174-11(25mm), HYG-DH174-12(25mm), HYG-DH174-L3(25mm). HYG-DH174-14(25mm), HYG-DH174-L5(25mm), HYG-DH174-L6(25mm), HYG-DH174-$1(20mm), HYG-DH174-52(20mm), HYG-DH174-53(20mm), HYG-DH174-54(20mm), HYG-DH174-55(20mm), HYG-DH174-56(20mm)

Applicable models

Model

Applicable brand
Hex0.9 Xive
Hex1.0 Ankylos
Hex1.2 Osstem | DIO | 3I | C-Tech | ICM | Megagen | T-plus
Hex1.25 Cortex | Ticare | ABT | Zimmer
Hex1.27 Dentium | Dentis | Bego | Astra | Adin | MIS | Alpha | Biotec | Biohorizon
Hex1.4 ICX
NOB Nobel | Basic | Omni-Tight | Dental master
ITI Straumann | Trausim | Bioconcept

Scope of application

Used for dental implant processes.

Instructions

Choose a suitable screw and secure it with a torque wrench.

Precautions and warnings

  1. Dental implant tools must be cleaned and sterilized before use.
  2. The chemical reagents used for the reprocessing of dental implant tools should not be strong acids with strong corrosiveness or a strong alkaline solution.
  3. When dental implant tools are damaged or worn out significantly, they should be replaced with new ones.

Leave a Reply

Your email address will not be published. Required fields are marked *